A dearth in NAND flash chip supply will cause the prices of mainstream SSDs (solid-state drives) to leap by as much as 16 percent this quarter over the previous quarter, meaning laptop makers won't likely offer consumers higher capacity SSDs in their new systems, according to a report from market research firm DRAMeXchange.
On average, contract prices for multi-level cell (MLC) SSDs supplied to the PC manufacturing industry are projected to go up by 12 percent to 16 percent compared with the final quarter of 2016; prices of TLC (triple-level cell) SSDs are expected to rise by 10 percent to 16 percent sequentially, according to DRAMeXchange.
In the second quarter of 2017, the average prices of mainstream client-grade SSDs will keep climbing, but at a more moderate rate.
Samsung The 960 Pro, an M.2 NVMe SSD, is available in up to 2TB.
"Average contract prices of client-grade SSDs in the PC-[manufacturing] market are rising this first quarter because not only [are] PC clients ... aggressively stocking up their inventories, [but] smartphone clients are also maintaining strong demand for storage components," said Alan Chen, a senior research manager of DRAMeXchange.
In the current quarter, shipments of client-grade SSDs are expected to see a sequential drop of 7 percent to 8 percent due to a continuing undersupply in the NAND flash market. SSD shipments will be severely constrained in the near term as prices of TLC NAND flash continue to rise and memory module makers lack chips in stock.
MLC NAND flash stores two bits of data per transistor; TLC NAND flash stores three bits per transistor.
Also, affecting the price of SSDs is an industry-wide transition to 3D-NAND and 2D-NAND TLC, which has "sharply" reduced the supply of 2D or planar MLC-based NAND flash memory.
Micron An example of Micron's 3D NAND chip and gumstick SSD.
"Thus, the price increase of MLC-based SSDs is outpacing that of TLC-based SSDs," Chen said. "On the other hand, the tight NAND flash supply and sharp price hikes for SSDs will likely discourage PC-[manufacturers] from raising storage capacity. Therefore, the storage specifications for mainstream PC...SSDs are expected to remain in the 128GB and 256GB [range]."
Samsung is still the leader in the 3D NAND market, as the company has been shipping products based on its 48-layer technology since the fourth quarter of 2016. Micron and Intel, which are working together on 3D-NAND products, also started to ship their 3D-NAND SSDs in the fourth quarter, albeit in smaller volumes. Other competitors are slated to reveal their respective 3D-NAND SSDs in the first half of 2017 and begin shipments after that.
SSDs are increasingly the preferred mass storage device by consumers buying laptops because they enable faster read/write speeds than hard disk drives (HDDs), so computer makers will keep up their SSD purchases despite tight supply for NAND flash and SSDs, Chen said. SSDs have five times or more the read/write performance of HDDs.
The SSD adoption rate in the global notebook market is estimated to reach 45 percent this year, according to DRAMeXchange. The uptick in SSD adoption will be greater in the consumer-class notebook segment than the business-class segment.
DRAMeXchange anticipates that the global shipment share of client-grade SSDs using TLC flash will exceed 75 percent in 2017. Moreover, 3D-NAND TLC is expected to become the mainstream flash device for TLC-based SSDs shipped this year.
As for the 2D-NAND MLC and the 3D-NAND MLC-based flash chips, they are not cost competitive and their chips are short in supply. Therefore, 2D- or 3D-NAND MLC will be used mainly for high-end SSD lines.
Lucas Mearian A 240GB SSD from SanDisk that is based on triple-level cell NAND flash and uses the SATA III (6Gbps) interface.
As for SSD interface technologies, the adoption of the Peripheral Component Interconnect Express (PCIe) specification by computer makers (excluding Apple) will steadily increase compared with the more common serial ATA (SATA) interface. The PCIe interface is a physical interconnect for motherboard expansion. It vastly outperforms SATA as it requires no adaptor and the latest PCIe 3.0 specification allows for up to 16Gbps throughput.
The latest SATA specification offers up to 6Gbps throughput.
Intel has improved PCIe support for its CPU platforms and the number of suppliers for this interface has also grown, DRAMeXchange said in its report. DRAMeXchange expects the penetration rate of PCIe in the client-SSD market to reach around 25 percent in 2017, with PCIe 3.0 as the market share leader for that interface type. SATA III, however, will remain as the mainstream interface in the client-grade SSD market.
This story, "Why laptops won’t come with larger SSDs this year" was originally published by Computerworld.