Review: HP 3PAR conjures powerful storage magic

HP 3PAR StoreServ 7400 combines high scalability, high performance, and a big bag of tricks for easing storage management

Review: HP 3PAR conjures powerful storage magic

If you believe in magic quadrants, then it will come as no surprise that the market for high-end, general-purpose disk arrays is hotly contested, with six closely grouped contenders. EMC sits at the top, but Dell, Hitachi, Hewlett-Packard, IBM, and NetApp are breathing down its neck. HP's position in the ranks is heavily influenced by its acquisition of 3PAR a few years back. 3PAR's magic makes HP a strong contender in the block-storage or storage array network (SAN) arena, able to stand up to all comers.

For this review InfoWorld was offered the opportunity to go hands-on with an HP 3PAR StoreServ 7400 in HP's lab. I was allowed to exercise the management software, configure various storage options, and test out the system with both VMware and Microsoft software. HP 3PAR has been a VMware partner for many years, and its integration with vSphere and vCenter Server include plug-ins specifically for provisioning new storage on a 3PAR system.

[ Review: HP brings sizzle to Windows Storage Server | Get the latest practical info and news with Paul Venezia's The Deep End blog and InfoWorld's Data Center newsletter. ]

On the Microsoft side, the HP 3PAR systems support a number of the new Windows Server 2012 features, including Offline Data Transfer (ODX) and the SMI-S storage management standard. The HP 3PAR StoreServ 7400 system I tested was configured with four control nodes, six disk cages containing 46 SAS physical disks and 24 Nearline (NL) disks. List price for the system as tested is $235,000 before discounting. Basic configurations start at $35,000 for a bare-bones system with four control nodes. For network connectivity, there's 10GbE and 8Gb Fibre Channel. FCoE is in the works.

Modular, mesh-based architecture
When you examine high-end storage arrays, you typically see either a modular design or a monolithic approach. Monolithic systems typically place all of the components in the same cabinet and use dedicated interconnects to achieve the highest performance. Modular systems break up the system into functional units and use more traditional interconnects at the cost of lower performance. The modular approach provides more flexibility in terms of expanding capacity by simply adding more storage modules.

From a high-availability (HA) perspective, you must add redundancy to protect against a single-point failure. If you've looked at any literature from the different storage vendors, you've no doubt seen terms like "active/active clustering" used to describe how the system handles the connectivity between the controller and the storage. There are also active/passive designs where all input and output (I/O) happens between the primary controller and storage until a failure occurs, at which time control passes to the backup processor. Active/active designs keep both (or all) controllers working all the time and distribute the I/O proportionately.

InfoWorld Scorecard
Performance (20.0%)
Scalability (20.0%)
Interoperability (10.0%)
Reliability (20.0%)
Value (10.0%)
Management (20.0%)
Overall Score (100%)
HP 3PAR StoreServ 7400 9.0 9.0 9.0 9.0 9.0 10.0 9.2
1 2 3 Page 1
Page 1 of 3
How to choose a low-code development platform