Product review: Raritan makes a power play
Raritan enters managed PDU market with the Raritan PX lineFollow @pvenezia
These days, remote accessibility is the very key to maintaining a stable network that spans a city, region, country, or the globe. One of the somewhat neglected areas for remote management, however, is at the power source. In some failure scenarios, the only way to recover functionality from a failed server, switch, or router is with the good old power cycle. Unfortunately, there are many instances where this requires someone to actually flip the power switch or even unplug a device in order to perform the hardest of resets. That’s where managed PDUs (power distribution units) can come in very, very handy.
Switchable PDUs have been around for a while and are made by many vendors. Generally speaking, they offer little in the way of configuration and features, since their only goal is to provide the ability to switch the outlet on and off. They can be serially controller or offer an Ethernet interface for telnet, SSH, or Web access. Raritan’s brand-new PX line of managed PDUs offers Web access, but with a surprising array of features.
[ Do you KVM over IP? The Raritan Dominion KX II is slick, fast, and in total control. ]
In the lab, I tested the PX PCR8-15, a 1U/0U convertible unit. It’s rather deep -- far deeper than a traditional PDU -- and offers eight switchable outlets. In addition to these outlets, it has an LED power meter at the rear, and serial, Ethernet, and Feature ports on the front. Nominally, it works like a glorified power strip; you plug it into a power source, and plug other devices into the outlets on the back. That’s where the comparisons to a power strip stop, and the manageability of the PX line becomes clear.
Configuration of the PX PCR8-15 was straightforward: Plug a serial console into the serial jack, run a terminal emulator, and set some baseline configuration parameters such as a static IP address, or DHCP. The rest of the configuration can be performed via the Web interface. There’s also an SSH interface available, and all communication is encrypted with 256-bit AES (Advanced Encryption Standard).
The Web interface looks and feels exactly like the more recent KVM products from Raritan, which will all but eliminate the learning curve for those already using recent Raritan Dominion KVM-over-IP switches. The Web interface offers a significant range of options and features, from NTP (Network Time Protocol) time synchronization, LDAP and RADIUS authentication, and full SNMP poll/trap support to automated e-mail alerts, configurable voltage alert ranges per outlet, and with optional sensor modules, even humidity and temperature probes and reporting.
More than just electricity
This is where it gets interesting. With the optional temperature and humidity probes, configurable actions are possible. For instance, if the temperature reading from a probe eclipses a specified range, it’s possible to send an SNMP trap, fire off an e-mail, and turn one or more outlets on or off. This could be used in a wide variety of applications, such as powering on a small backup AC unit or powering down the same if the temperature drops too low. Obviously, anything that uses AC power can be controlled in this way.