| About InfoWorld : Advertise : Subscribe : Contact Us : Awards : Events : Store |
 |
||||
|
||||
 | ||||
 |
|
|||
 |
||||
|
|
|
||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 TEST CENTER Reboot, restore, resume By Mario Apicella October 4, 2002 PROBABLY ONE OF the most annoying recurring tasks for the help desk is restoring a PC with damaged software to pristine condition. A virus is one of the most common threats, and often new pathologies can slip through corporate defense lines. In addition, users unknowingly can cause the damage by tampering with configuration files, for example, or by installing faulty software that damages the original setup to a point of no return.
Wouldn't it be great to be able to quickly restore a damaged PC to a working state with the flip of a switch and few key strokes? Infrastructure Development, a startup company in San Diego, has developed CoreRestore, hardware for ATA drives that does exactly that: If the OS or the configuration becomes damaged, simply rebooting and changing a password-protected CMOS setting will bring the hard drive and its software back to a known, working state. Future versions of the card will offer hardware-driven encryption to protect data from prying eyes. CoreRestore is a half-size PCI card that installs in just about any computer and is software-independent. In fact, in our tests, it worked well on Linux, Windows, and even humble and forgotten DOS. Setting up the configuration, however, takes work and requires starting from a scratch disk. Therefore, before installing CoreRestore, you should back up your disk drive. The card has two ATA connectors that hook up the motherboard and the drive. An onboard chip can be programmed, using the embedded CMOS, to carve two areas from a disk drive, a persistent area and a volatile area. The two areas must be the same size because CoreRestore will use them as mirror images. Interestingly the OS will see a single volume, not two separate areas. Any remaining space can be used as an additional volume but won't be protected by CoreRestore. An additional CMOS setting defines how the drive is accessed. In Install mode -- used to load the OS and configure the PC -- the CoreRestore controller will direct-write operations to the persistent area, ignoring the volatile area. Nothing out of the ordinary so far. The interesting part of CoreRestore Live Disk mode, which an administrator uses to configure CoreRestore before assigning the PC to a user. In this mode, CoreRestore directs all write operations to the volatile area, leaving the persistent area unchanged. At the same time, CoreRestore accurately maps which sectors on the volatile area have been changed, so that read operations always will return the most recently updated sector. With that in mind, understanding how CoreRestore can revert a damaged volume to a working state is intuitive: Reboot, select Restore from the CMOS menu, and in the blink of an eye, the volume will "forget" what was written to the volatile area and bring the PC back to working condition. This is clearly the most important feature of CoreRestore, and this speedy recovery is payback for a laborious and somewhat unforgiving setup. Another interesting feature of CoreRestore is its ability to commit changes made to the volatile area to the persistent zone. This option, called Backup, is a precious help for administrators. It makes possible saving subsequent settings permanently, such as the addition of more peripheral drivers or software. Moreover, you can set CoreRestore to "forget" changes to the volatile area at each reboot, so that users always have a reliable setting on their PC. We consider this option especially useful to power users such as developers or testers. We tested CoreRestore successfully on off-the-shelf Compaq and Gateway desktop PCs, and we don't foresee problems with other hardware. But you should consider the internal layout of each computer case. We had some difficulties routing the ATA cables from the card to the motherboard and hard drive of some ultracompact desktops. CoreRestore is obviously not to blame for this (actually, the card ships with two full-length, ATA-100 ready ribbons). Nevertheless, it may be an obstacle. Our first trial was installing a dated Corel version of Linux. We instructed CoreRestore to fill our drive with two equally sized mirrors. Then we set the card to Install mode and installed the OS. Next, we set CoreRestore to Live Disk mode. The card wrote changes only to the volatile section, keeping the persistent area intact. Our Corel Linux system worked like a charm. To mimic a malicious or careless user, we then deleted some critical directories including bin, user, and dev. We tried to reboot, but Linux hung while trying to shut down and the mouse became unusable. We switched the power off, and then back on. Not surprisingly, Linux would not start. With CoreRestore, we restored the system in seconds. We performed a hard reset once more, but this time, we invoked the CoreRestore CMOS and chose Restore. We rebooted again, and Linux started in all its glory. CoreRestore is a brilliant and effective new approach to an old problem that could become a hot selling feature if factory-installed in new PCs by major vendors such as Compaq-HP, Dell, or Gateway. Installing the card to existing PCs requires significant work, which makes deployment on a large scale more expensive, hence less appealing. Nevertheless, CoreRestore offers the quickest and most effective remedy to date for recovering a damaged ATA volume on your PC. 
SPONSORED WHITE PAPERS 
SPONSORED LINKS
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||
|
||||||||||
