IBM and Intel to open up blade specifications

Hardware makers will get guidelines for building blade components, but the specifications do not enable companies to clone the entire blade systems.

In an effort to encourage hardware vendors to build components for the blade platform they co-develop, Intel Corp. and IBM Corp. on Thursday will open up parts of the BladeCenter design specifications, according to documents obtained by IDG News Service.

The two companies began joint development work on Xeon-based blade designs in September 2002, with IBM lending expertise in system design and software and Intel providing expertise on processors, chipsets and communication chips. IBM has used the jointly developed blade designs as the basis for its eServer BladeCenter platform, while Intel has offered the technology to hardware makers under license.

Access to the design specifications for these blade systems has thus far been restricted by nondisclosure agreements and licensing fees. With Thursday's announcements, however, hardware vendors will be able to get access to the BladeCenter specifications by signing a seven-page licensing agreement, which grants users the rights to license the specifications for certain types of products, according to instructions posted on IBM's Web site.

By opening the BladeCenter specifications the two companies hope to encourage hardware vendors to develop "networking switches, blade adaptor cards, and appliance and communications blades for enterprise networks," according to a statement obtained by the IDG News Service.

The specifications will include guidelines and tips and tricks for building blade components, said a source familiar with the announcement.

They do not, however, enable companies to clone the entire blade systems. "Not all of the parts to build a blade are in the specification. You still have to come to IBM or Intel for the chassis or the management module," the source said.

By opening their blade designs, IBM and Intel may make it easier for some vendors in new highly specialized markets to build components for the servers, said Charles King, an analyst with The Sageza Group Inc. in Mountain View, California. "I think they're going to tap into some of the enthusiasm and specialized knowledge of vendors that might be swept under the rug if they tried to come in through the front door."

Blade rival Hewlett-Packard Co. (HP) said it had no plans to follow a similar approach and open up its own blade specifications, but will continue to share them with partners under nondisclosure agreements, according to Rick Becker, vice president and general manager of blades with HP.

Intel and IBM to date have not received widespread industry support for their blade designs, and Thursday's news is unlikely to change things, Becker said.

Information on the BladeCenter specifications can be found here: http://www-1.ibm.com/servers/eserver/bladecenter/open_specs.html

Intel and IBM declined to comment on this story.

Mobile Security Insider: iOS vs. Android vs. BlackBerry vs. Windows Phone
Recommended
Join the discussion
Be the first to comment on this article. Our Commenting Policies