Optimizing and accelerating traffic across the WAN no longer requires searching for exotic solutions -- there are a variety of appliances available from which admins may choose. Simply install an appliance on both ends of the WAN circuit and let them reduce network chatter, help mitigate the effects of latency, and make better overall use of the link.
This optimization lovefest breaks down, however, with mobile users and small offices. For obvious reasons, an appliance isn't appropriate for users on the go, and branch offices with a small number of users typically can't justify the cost of WAN acceleration hardware. The solution is to deploy a software-based optimization client to each user, whether mobile or not, and allow the soft client to help provide better overall performance and improve the end-user experience.
One such solution is Blue Coat's SG Client, currently based on version 5.2 of the SGOS. When paired with an SG appliance (I used an SG 200 during my tests), the SG Client provided good overall performance improvements over nonoptimized traffic. SG Client allows admins to define specific optimization policies for specific user needs but is available for Windows XP users only. Sorry, Windows 2000 and Vista aren't supported.
Of bits and bytes
I tested SG Client using the same test bed I used with Riverbed's Steelhead Mobile software client. I simulated two different WAN links in my Shunra VE WAN emulator: one a cable modem connection (3Mbps/512Kbps, 65ms latency), and the other a DSL connection (1.5Mbps/386Kbps, 50ms latency) serving a 802.11b/g Wi-Fi hotspot. I used a Dell OptiPlex running Windows XP Pro as my client PC, and I used Macro Scheduler from MJT Net to execute and time each test.
[ See our reviews of the Riverbed Steelhead 4.1 appliance and Steelhead Mobile 1.0.1 and the Blue Coat SG800 appliance ]
I found that SG Client reduced WAN traffic and transfer time in all test scenarios, with CIFS traffic showing the most improvement. A test case of copying many small files took 20 minutes to complete with no optimization, whereas a cold pass with SG Client copied the same files in just over 11 minutes -- roughly a 1.7X improvement. Another test involving opening, copying, and updating a file in Microsoft Excel showed the most improvement, reducing a nonoptimized time of nearly 20 minutes to a manageable 2 minutes on a first pass (a 9.6X increase). Although definitely an improvement over nonoptimized connections, SG Client didn't match Riverbed's Steelhead Mobile in overall performance in the same tests (3.9X and 16.2X, respectively).
FTP traffic showed the least amount of improvement of all traffic types I tested, barely registering any improvement at all, regardless of whether the download was a first pass or subsequent "hot" pass. SG Client provides no specific optimization for FTP and no object caching. This means that no matter how many times a file is copied using FTP, it is always treated as a first pass, with only generic TCP optimizations taking place.
Blue Coat is addressing this limitation in the next release of SG Client, due this spring. (Watch for our follow-up review when the new release ships.) GZip compression is applied across all traffic types to help squeeze data down to further reduce traffic, but in the case of my FTP test (an ISO disk image), there wasn't much room for compression.
Admins centrally define and manage multiple client installations from the Client Manager interface in an SG appliance. Defining an optimization policy requires very few steps. Admins simply list the port numbers they want SG Client to optimize (or ignore, as the case may be) and whether they want to enable CIFS acceleration. The SG management console creates MSI and EXE files suitable for distribution to each remote PC. The installation package contains all of the necessary information to tell the client PC which SG appliance to connect to and which traffic to accelerate.
The SG management console also provides a wealth of statistical information on traffic from all connected SG appliances and SG Clients. I easily viewed traffic based on time period or protocol. The statistical and reporting engine is one of Blue Coat's strong suits, and I like how easy it was to slice and dice the information many different ways. One hitch: There is no way to filter out specific connections for analysis.
The SG Client itself provides nice real-time performance graphs, and it allows users to view the performance increase as well as enable/disable the client and clear the disk cache. Users can also see connection status and exactly which traffic is being optimized -- very cool.
Overall, SG Client is a solid first step toward providing mobile and branch office users with a way to participate in faster WAN access to corporate resources. Although it didn't set any performance records, and FTP optimizations await the next release, SG Client didn't disappoint when working with CIFS traffic. Blue Coat's excellent reporting and central management will make life easier for busy WAN admins. Finally, considering the affordability of Blue Coat's appliances and the fact that the SG Client is free, the Blue Coat solution promises to be easier on the budget than many competing solutions.
Protocol support (25.0%)
Overall Score (100%)
|Blue Coat SG Client 5.2||9.0||7.0||9.0||8.0||9.0|
You may still be better off sticking with Win7 or Win8.1, given the wide range of ongoing Win10...
Now that we're down to the wire, many upgraders report that the installer hangs. If this happens to...
Based on a technique created by a German blogger, here's how to stop wasting hours checking for Windows...
The swirl of new enterprise tech settled a bit in 2016, leaving a clear framework for the future -- and...
Picking an Android phone can be difficult, but we're here to help. These are the top Android phones you...
What does the future hold for Python, aside from new versions of the language? Let's check the crystal...
Thanks to stalwarts like MySQL, MongoDB, and Cassandra, the database realm has been a haven for open...