Richard Smith needed to build a wall-climbing robot for a customer -- so he printed one.
Smith, director of Smith Engineering Gb Ltd., used a CAD program to design a 3D model of the WallRover, a dual-track roving robot with a spinning rotor in the chassis that creates enough suction to hold the device to a wall. He then sent the design file for each component to a 3D printer, which sliced the objects into sections less than 1/100th of an inch thick by printing it, one layer at a time, using molten ABS plastic as the "ink."
[ Keep up on the day's tech news headlines with InfoWorld's Today's Headlines: Wrap Up newsletter. ]
As a 3D printer begins fabricating an object, each layer gets fused or glued to the previous one and the product gradually gets built up. Under the hood, 3D printers use a variety of different fabrication techniques, several of which are based on ink-jet technology, and can use many different types of "build" materials to print three-dimensional objects. (To learn more about the different types of 3D printers, check out our comparison chart.)
Before buying a 3D printer, Smith would send its designs to a service bureau for fabrication, and parts took three or four days to turn around. Had Smith used a service bureau for the WallRover project -- which went through 22 design iterations -- it would have taken six months to complete, Smith says.
Instead, Smith was able to get a final design and fully functional prototype to the client within two weeks.
And he did it using a consumer-grade 3D "plastic jet printer" that he built from a kit. The RapMan, from 3D Systems' Bits From Bytes division, cost just $1,500. Smith spent another $180 for plastic filament -- the "ink" consumed by the printer. "It saved five months of development time and somewhere in the neighborhood of $15,000 to $20,000 in models" that were created in-house instead of being sent to a service bureau, he says.
Smaller and cheaper
3D printing isn't new. The manufacturing technique known today as 3D printing, also called additive manufacturing or direct digital manufacturing, has been used for rapid prototyping for decades. But over the last 24 months, prices have dropped to a level that makes it appealing to a wider audience.
The technology is more compact, particularly in the plastic jet-printing category. Cathy Lewis, vice president of global marketing at printer manufacturer 3D Systems Inc., says today's models are "ideal" for personal use.
But creating a printable 3D object can be tricky. Designs created in a CAD program need to be "water tight," or complete. "All surfaces have to be closed and lie on top of each other or you get holes in your part," says Jon Cobb, vice president of marketing at 3D printer vendor Stratasys.
The design then needs to be exported to a standard file format 3D printers can use, most often the stereolithography (STL) format, originally developed by 3D Systems, that has become a de-facto industry standard.
Until recently, the quality of STL files produced by CAD programs wasn't sufficient for 3D printing and required additional cleanup. But, Cobb says, that problem has largely gone away in professional solid modeling tools such as AutoCAD or SolidWorks. (Consumer-oriented design tools are a different story; see sidebar at left.)
Even so, Pete Basiliere, an analyst at Gartner who covers 3D printing, doesn't see consumers using the technology for personal printing of unique, one-off household items. "What's inhibiting consumer use is cost. It's too expensive for most people." Instead, he says, service bureaus may step in to fill those needs.
Another issue is that some objects need to have supports added so they don't collapse or sag before the materials fully harden. If an object needs to be supported during the printing process, the pre-processing driver software that comes with the 3D printer makes that determination and automatically adds any needed structural supports to the design.
The support material is usually different from the build material, and must be removed during a post-processing step that typically involves blowing off, breaking off, dissolving, melting or cutting away the unwanted material.
Price is right
Declining prices, improved quality and easier to use software are opening up demand for 3D printers. Commercial models -- capable of cranking out industrial manufacturing prototypes -- that once cost $100,000 now start at about $15,000, while personal 3D printers for the hobbyist and education market sell for less than $1,500.
"It used to be a six- or seven-figure cost," says Gartner's Basiliere.
Among industrial offerings, higher-end models add features such as the ability to print colors (although most can only print one color at a time), to run jobs faster, to print thinner layers for finer detail and to offer a larger printable area for creating larger objects.
For industrial designers doing prototyping, even an entry-level 3D printer is faster than going to a service bureau, and operating costs can come in as low as one-tenth of service bureau rates. The prices of 3D printers are now low enough to justify in departmental budgets, says Gartner's Basiliere.
Manufacturers, such as automakers, have traditionally used 3D printers in a lab or as part of a separate internal "service bureau," says Terry Wohlers, principal consultant and president of Wohlers Associates Inc., which tracks the 3D printing market. Now they are showing up in corporate offices, where they sit on the network like any other networked printer. "Because they're more affordable, now they're spread all across General Motors and Chrysler," he says.
Other industries use the technology, too. Ben White uses a 3D printer from Z Corp. to produce prototypes of window curtain poles, tracks, blinds and other hardware for Integra Products Ltd. "It's more economical to lease a printer than it is to keep sending products out for fabrication," says White, senior product design engineer. "We're at 10 to 15 percent of the cost of the service bureau," he says, the turnaround is faster and the models are more accurately rendered to the original design specifications. After six months the company is using the printer to produce 95 percent of its prototypes.
Others report similar savings. By using an HP DesignJet for rapid prototyping, Tintometer Ltd. sped up its product development times by 40 percent to 60 percent, says industrial designer Amy Penn. And the company, which manufactures industrial instruments that measure color, also uses the 3D printer to build finished products.
The DesignJet builds testing jigs that calibrate components before they're inserted into the final instrument during the manufacturing process. The parts more precisely meet the original specifications compared to what Tintometer was able to get from a service bureau, and are just as sturdy and a lot cheaper, says Penn. The 3D printer also made it cost effective to print concept parts that sales people can show to customers. "The ROI was about six months," she says.
Penn did not disclose what she paid, but she has the DesignJet 3D color unit, which sells for 16,200 Euros, or about $21,000 U.S. The monochrome version of the DesignJet 3D printer sells for 12,500 Euros.
In terms of shipments, the market for 3D printers remains relatively small. Unit shipments for professional use grew at a compound annual rate of 37 percent in 2010, according to Wohlers. This includes usage by industrial engineers, architects, engineers in traditional markets such as aerospace, consumer products, electronics, tool makers and other manufacturing concerns. But that 2010 growth amounted to just 6,164 units -- a tiny fraction of the 2D printer market. In 2010 there were over 44 million traditional printers shipped worldwide, according to IDC.
With only 51,000 3D printers sold worldwide since 1988 and 2.7 million solid modeling CAD seats worldwide, Wohlers estimates that there's plenty of room for growth. By 2015, Wohlers expects, shipments of industrial 3D printers will more than double to 15,000 units.
The potential for growth is one reason why Hewlett Packard dipped a toe in the water with the introduction of the DesignJet 3D, which HP sells only in Europe. The printer is a re-branded version of market leader Stratasys' uPrint 3D printer.
A growing hobbyist market has also developed for 3D printers; people use the technology to make everything from toys to drawer pulls. Free 3D modeling tools for hobbyists (see sidebar at right) make the creation process easier, while companies such as MakerBot Industries, LLC provide low-cost plastic extrusion, or plastic jet printers.
Manufacturers also offer libraries of preconfigured objects that users can work with. For example, MakerBot offers Thingiverse, a website where users can share objects they've created. Autodesk 123D offers a similar community.
Many personal 3D printers go to educational institutions, rather than homes. "We want to get these into the hands of kids," says MakerBot CEO Bre Pettis. "It gives them access to the raw power of innovation."
Unfortunately, simple 3D design software for home hobbyists isn't suitable for professional use, and professional tools are still quite complicated to use. That leaves a big gap between consumers and industrial designers. "Today you need to be an expert CAD user to create digital content, or you need a fancy scanner to capture 3D geometry of an object you want to print," says Lewis at 3D Systems.
The MakerBot 3D printer, which sells for $1,500, makes 3D objects by applying successive layers of molten ABS plastic. While designed for the home/hobby market, professional designers are finding the devices usable for some commercial applications. For example, Smith Engineering used a similar product to build and assemble the parts for a commercial robot prototype.
In 2010, 3D printer vendors shipped 5,978 personal 3D printers -- almost as many as sold into the professional market. But Wohlers doubts that a broad do-it-yourself at-home market will develop for personal 3D printers.
The bigger market, he says, will be the emergence of on-demand manufacturers that use industrial 3D printers or personal 3D printers that cost from $500 to $5,000. They will produce unique one-off or small-quantity items tailored to consumers or businesses that don't want bother with designing and printing items for themselves, Wohlers says.
Gartner predicts that the price for professional 3D printers that now sell for $15,000 will decline to about $2,500 by 2020 and will deliver better performance and more features. But ultimately, says Basiliere, "From the manufacturer's perspective it's not the sale price of the printer but the sale of the supplies that matters most." Average consumables costs for 3D printers range from $2.50 to $10 per cubic inch, according to Basiliere.
The emergence of low-cost 3D printing lowers the bar for some types of manufacturing. "Companies and individuals with design talent and business savvy can start a business and start manufacturing products," Wohlers says.
After seeing what a 3D printer could do, Ed Fries, the former vice president of Microsoft Game Studios, started up FigurePrints, which uses Z Corp.'s ZPrinter machines to create one-of-a kind models of personal avatars for World of Warcraft and Xbox Live game enthusiasts.
FigurePrints downloads the characters directly from each game site, and lets users pose them before placing an order. An artist then cleans up the object, smoothing away the series of polygons that describe the figure and adding a third dimension to some 2D elements of the image, such as a cape and hair.
Fries chose Z Corp.'s ZPrinter because it is the only 3D printer on the market that supports full-color printing. That is, it can print an object using multiple colors.
He considered more traditional manufacturing techniques, such as a resin-cast process designed for low-volume production. "But you can't hand paint to the resolution we get, which is 600 dpi," he says, and it cost more.
That's a key advantage of the full-color ink-jet printing approach, says Z Corp. CEO John Kawola. "Because we use ink jet heads you can print a bottle with all of the label graphics and text on it."
While plastic jet printers heat and extrude ABS plastic through an "extrusion head" that looks like a syringe or glue gun, Z Corp.'s ZPrinter builds a 3D object by spreading a thin layer of a powder and then using an ink-jet print head to selectively deposit a liquid that hardens it.
As the layers build up, the unused powder that surrounds the object serves as a support. Once the item is finished, it goes to a cleaning station where a technician uses compressed air to remove the powder residue. The composite material, which has a polymer component, isn't as strong as ABS plastic, so FigurePrints dips each in a glue solution that hardens the material.
Even using the hardener solution, the final product isn't nearly as strong as injection-molded ABS plastic. Initially some characters, which tended to have overdeveloped upper torsos but thin ankles, snapped off the base during shipment. So artists take some license with images, in some cases thickening ankles or extending a cape or weapon to the base to add support.
"The texture and appearance of the finished product is OK, but isn't to the standard of a plastic injection-molded action figure you would buy at the store," Fries admits.
The colors aren't as bright, and the finished product has a texture that Fries describes as somewhat "chalky." But it works fine for models that ship in a glass display case, and the price is right: It costs about $5 per cubic inch to print a figure, not including pre- and post-processing time.
FigurePrints sells the characters for about $15 per cubic inch -- and users seem willing to pay. "A common request is for wedding cake toppers," Fries says. "Couples meet in the games and want their characters on top of the wedding cake."
Smith also likes the idea of using 3D printers for one-off or limited run manufacturing. "We can do small-scale production -- tens of units -- without spending the money on expensive injection-molding tools," he says. But the printer works slowly, producing up to about four runs a day. FigurePrints gets about two products per day from each of its printers.
"If you're trying to manufacture with these machines, throughput is everything," Wohlers says. Using 3D printers successfully in a manufacturing setting will require better automation of both pre-processing and post-processing steps.
Cobb says Stratasys expects to cut total pre- and post-processing time for a typical print job in half, from 5 hours today to about 2.5 hours within the next three years, and for prices to drop from today's $15,000 for its entry-level professional printer to between $7,000 and $10,000 in that same timeframe. "In three to five years you will have the same capabilities for under $5,000," he says.
In the personal printer space, says Lewis at 3D Systems, prices will drop even further. "In the next year or two you will see us go past the $1,000 mark. In two years we'll be close to $500," she says.
How much the market will grow as prices continue to drop, and whether a mass market will ever emerge, is an open question. But as easy-to-use 3D design tools get better, and as shared 3D object libraries gain in size and sophistication, businesses and consumers may come up with new applications for the technology that haven't yet been envisioned. "3D printing is where the semiconductor business was in the 1960s," Wohlers says. "We know it is going to be big but we don't know how big."
This story, "3D printers: Almost mainstream" was originally published by Computerworld.