Millions of pieces of malware and thousands of malicious hacker gangs roam today's online world preying on easy dupes. Reusing the same tactics that have worked for years, if not decades, they do nothing new or interesting in exploiting our laziness, lapses in judgment, or plain idiocy.
But each year antimalware researchers come across a few techniques that raise eyebrows. Used by malware or hackers, these inspired techniques stretch the boundaries of malicious hacking. Think of them as innovations in deviance. Like anything innovative, many are a measure of simplicity.
[ Verse yourself in 14 dirty IT security consultant tricks, 9 popular IT security practices that just don't work, and 10 crazy security tricks that do. | Learn how to secure your systems with the Web Browser Deep Dive PDF special report and Security Central newsletter, both from InfoWorld. ]
Take the 1990s Microsoft Excel macro virus that silently, randomly replaced zeros with capital O's in spreadsheets, immediately transforming numbers into text labels with a value of zero -- changes that went, for the most part, undetected until well after backup systems contained nothing but bad data.
Today's most ingenious malware and hackers are just as stealthy and conniving. Here are some of the latest techniques of note that have piqued my interest as a security researcher and the lessons learned. Some stand on the shoulders of past malicious innovators, but all are very much in vogue today as ways to rip off even the savviest users.
No hack is easier to accomplish than a fake WAP (wireless access point). Anyone using a bit of software and a wireless network card can advertise their computer as an available WAP that is then connected to the real, legitimate WAP in a public location.
Think of all the times you -- or your users -- have gone to the local coffee shop, airport, or public gathering place and connected to the "free wireless" network. Hackers at Starbucks who call their fake WAP "Starbucks Wireless Network" or at the Atlanta airport call it "Atlanta Airport Free Wireless" have all sorts of people connecting to their computer in minutes. The hackers can then sniff unprotected data from the data streams sent between the unwitting victims and their intended remote hosts. You'd be surprised how much data, even passwords, are still sent in clear text.
The more nefarious hackers will ask their victims to create a new access account to use their WAP. These users will more than likely use a common log-on name or one of their email addresses, along with a password they use elsewhere. The WAP hacker can then try using the same log-on credentials on popular websites -- Facebook, Twitter, Amazon, iTunes, and so on -- and the victims will never know how it happened.
Lesson: You can't trust public wireless access points. Always protect confidential information sent over a wireless network. Consider using a VPN connection, which protects all your communications, and don't recycle passwords between public and private sites.
Browser cookies are a wonderful invention that preserves "state" when a user navigates a website. These little text files, sent to our machines by a website, help the website or service track us across our visit, or over multiple visits, enabling us to more easily purchase jeans, for example. What's not to like?
Answer: When a hacker steals our cookies, and by virtue of doing so, becomes us -- an increasingly frequent occurrence these days. Rather, they become authenticated to our websites as if they were us and had supplied a valid log-on name and password.
Sure, cookie theft has been around since the invention of the Web, but these days tools make the process as easy as click, click, click. Firesheep, for example, is a Firefox browser add-on that allows people to steal unprotected cookies from others. When used with a fake WAP or on a shared public network, cookie hijacking can be quite successful. Firesheep will show all the names and locations of the cookies it is finding, and with a simple click of the mouse, the hacker can take over the session (see the Codebutler blog for an example of how easy it is to use Firesheep).
Worse, hackers can now steal even SSL/TLS-protected cookies and sniff them out of thin air. In September 2011, an attack labeled "BEAST" by its creators proved that even SSL/TLS-protected cookies can be obtained. Further improvements and refinements this year, including the well-named CRIME, have made stealing and reusing encrypted cookies even easier.
With each released cookie attack, websites and application developers are told how to protect their users. Sometimes the answer is to use the latest crypto cipher; other times it is to disable some obscure feature that most people don't use. The key is that all Web developers must use secure development techniques to reduce cookie theft. If your website hasn't updated its encryption protection in a few years, you're probably at risk.
Lessons: Even encrypted cookies can be stolen. Connect to websites that utilize secure development techniques and the latest crypto. Your HTTPS websites should be using the latest crypto, including TLS Version 1.2.
Hackers have been using file name tricks to get us to execute malicious code since the beginning of malware. Early examples included naming the file something that would encourage unsuspecting victims to click on it (like AnnaKournikovaNudePics) and using multiple file extensions (such as AnnaKournikovaNudePics.Zip.exe). Until this day, Microsoft Windows and other operating systems readily hide "well known" file extensions, which will make AnnaKournikovaNudePics.Gif.Exe look like AnnaKournikovaNudePics.Gif.
Years ago, malware virus programs known as "twins," "spawners," or "companion viruses" relied on a little-known feature of Microsoft Windows/DOS, where even if you typed in the file name Start.exe, Windows would look for and, if found, execute Start.com instead. Companion viruses would look for all the .exe files on your hard drive, and create a virus with the same name as the EXE, but with the file extension .com. This has long since been fixed by Microsoft, but its discovery and exploitation by early hackers laid the groundwork for inventive ways to hide viruses that continue to evolve today.
Among the more sophisticated file-renaming tricks currently employed is the use of Unicode characters that affect the output of the file name users are presented. For example, the Unicode character (U+202E), called the Right to Left Override, can fool many systems into displaying a file actually named AnnaKournikovaNudeavi.exe as AnnaKournikovaNudexe.avi.
Lesson: Whenever possible, make sure you know the real, complete name of any file before executing it.
Another interesting stealth trick that uses an operating system against itself is a file location trick known as "relative versus absolute." In legacy versions of Windows (Windows XP, 2003, and earlier) and other early operating systems, if you typed in a file name and hit Enter, or if the operating system went looking for a file on your behalf, it would always start with your current folder or directory location first, before looking elsewhere. This behavior might seem efficient and harmless enough, but hackers and malware used it to their advantage.
For example, suppose you wanted to run the built-in, harmless Windows calculator (calc.exe). It's easy enough (and often faster than using several mouse clicks) to open up a command prompt, type in
calc.exe and hit Enter. But malware could create a malicious file called calc.exe and hide it in the current directory or your home folder; when you tried to execute calc.exe, it would run the bogus copy instead.
I loved this fault as a penetration tester. Often times, after I had broken into a computer and needed to elevate my privileges to Administrator, I would take an unpatched version of a known, previously vulnerable piece of software and place it in a temporary folder. Most of the time all I had to do was place a single vulnerable executable or DLL, while leaving the entire, previously installed patched program alone. I would type in the program executable's filename in my temporary folder, and Windows would load my vulnerable, Trojan executable from my temporary folder instead of the more recently patched version. I loved it -- I could exploit a fully patched system with a single bad file.
Linux, Unix, and BSD systems have had this problem fixed for more than a decade. Microsoft fixed the problem in 2006 with the releases of Windows Vista/2008, although the problem remains in legacy versions because of backward-compatibility issues. Microsoft has also been warning and teaching developers to use absolute (rather than relative) file/path names within their own programs for many years. Still, tens of thousands of legacy programs are vulnerable to location tricks. Hackers know this better than anyone.
Lesson: Use operating systems that enforce absolute directory and folder paths, and look for files in default system areas first.
Unbeknownst to most of today's computer users is the existence of a DNS-related file named Hosts. Located under C:\Windows\System32\Drivers\Etc in Windows, the Hosts file can contain entries that link typed-in domain names to their corresponding IP addresses. The Hosts file was originally used by DNS as a way for hosts to locally resolve name-to-IP address lookups without having to contact DNS servers and perform recursive name resolution. For the most part, DNS functions just fine, and most people never interact with their Hosts file, though it's there.
Hackers and malware love to write their own malicious entries to Hosts, so that when someone types in a popular domain name -- say, bing.com -- they are redirected to somewhere else more malicious. The malicious redirection often contains a near-perfect copy of the original desired website, so that the affected user is unaware of the switch.
This exploit is still in wide use today.
Lesson: If you can't figure out why you're being maliciously redirected, check out your Hosts file.
Waterhole attacks received their name from their ingenious methodology. In these attacks, hackers take advantage of the fact that their targeted victims often meet or work at a particular physical or virtual location. Then they "poison" that location to achieve malicious objectives.
For instance, most large companies have a local coffee shop, bar, or restaurant that is popular with company employees. Attackers will create fake WAPs in an attempt to get as many company credentials as possible. Or the attackers will maliciously modify a frequently visited website to do the same. Victims are often more relaxed and unsuspecting because the targeted location is a public or social portal.
Lesson: Make sure your employees realize that popular "watering holes" are common hacker targets.
One of the most interesting ongoing hacker techniques is called bait and switch. Victims are told they are downloading or running one thing, and temporarily they are, but it is then switched out with a malicious item. Examples abound.
It is common for malware spreaders to buy advertising space on popular websites. The websites, when confirming the order, are shown a nonmalicious link or content. The website approves the advertisement and takes the money. The bad guy then switches the link or content with something more malicious. Often they will code the new malicious website to redirect viewers back to the original link or content if viewed by someone from an IP address belonging to the original approver. This complicates quick detection and take-down.
Lesson: Beware of any link to any content not under your direct control because it can be switched out on a moment's notice without your consent.
Stealth fallout: Total loss of control
Hackers have been using stealth methods to hide their maliciousness since the beginning days of malware. Heck, the first IBM-compatible PC virus, Pakistani Brain, from 1986, redirected inquiring eyes to a copy of the unmodified boot sector when viewed by disk editors.
When a hacker modifies your system in a stealthy way, it isn't your system anymore -- it belongs to the hackers. The only defenses against stealth attacks are the same defenses recommended for everything (good patching, don't run untrusted executables, and so on), but it helps to know that if you suspect you've been compromised, your initial forensic investigations may be circumvented and fought against by the more innovative malware out there. What you think is a clean system and what really is a clean system may all be controlled by the wily hacker.
- True tales of (mostly) white-hat hacking
- 14 dirty IT tricks, security pros edition
- IT's 9 biggest security threats
- 9 popular IT security practices that just don't work
- 10 crazy IT security tricks that actually work
- Malware Deep Dive Report
- Data Loss Prevention Deep Dive Report
- Insider Threat Deep Dive Report
- Malware IQ test: Round 1
- Malware IQ test: Round 2
This story, "7 sneak attacks used by today's most devious hackers," was originally published at InfoWorld.com. Follow the latest developments in security at InfoWorld.com. For the latest developments in business technology news, follow InfoWorld.com on Twitter.