Everyone wants faster database queries, and both SQL developers and DBAs can turn to many time-tested methods to achieve that goal. Unfortunately, no single method is foolproof or ironclad. But even if there is no right answer to tuning every query, there are plenty of proven do's and don'ts to help light the way. While some are RDBMS-specific, most of these tips apply to any relational database.
My previous collection of SQL do's and don'ts concentrated on individual query performance. While you’ll definitely find more of that here, the main focus is on increasing concurrency in your system. By minimizing locking, I/O, and network traffic, you can not only make your queries run much faster, but even more important, you can make queries behave themselves on a system with hundreds or even thousands of concurrent users.
1. Do use temp tables to improve cursor performance
I hope we all know by now that it’s best to stay away from cursors if at all possible. Cursors not only suffer from speed problems, which in itself can be an issue with many operations, but they can also cause your operation to block other operations for a lot longer than is necessary. This greatly decreases concurrency in your system.
However, you can’t always avoid using cursors, and when those times arise, you may be able to get away from cursor-induced performance issues by doing the cursor operations against a temp table instead. Take, for example, a cursor that goes through a table and updates a couple of columns based on some comparison results. Instead of doing the comparison against the live table, you may be able to put that data into a temp table and do the comparison against that instead. Then you have a single
UPDATE statement against the live table that’s much smaller and holds locks only for a short time.
Sniping your data modifications like this can greatly increase concurrency. I’ll finish by saying you almost never need to use a cursor. There’s almost always a set-based solution; you need to learn to see it.
2. Don’t nest views
Views can be convenient, but you need to be careful when using them. While views can help to obscure large queries from users and to standardize data access, you can easily find yourself in a situation where you have views that call views that call views that call views. This is called nesting views, and it can cause severe performance issues, particularly in two ways. First, you will very likely have much more data coming back than you need. Second, the query optimizer will give up and return a bad query plan.
I once had a client that loved nesting views. The client had one view it used for almost everything because it had two important joins. The problem was that the view returned a column with 2MB documents in it. Some of the documents were even larger. The client was pushing at least an extra 2MB across the network for every single row in almost every single query it ran. Naturally, query performance was abysmal.
And none of the queries actually used that column! Of course, the column was buried seven views deep, so even finding it was difficult. When I removed the document column from the view, the time for the biggest query went from 2.5 hours to 10 minutes. When I finally unraveled the nested views, which had several unnecessary joins and columns, and wrote a plain query, the time for that same query dropped to subseconds.
3. Do use table-valued functions
This is one of my favorite tricks of all time because it is truly one of those hidden secrets that only the experts know. When you use a scalar function in the
SELECT list of a query, the function gets called for every single row in the result set. This can reduce the performance of large queries by a significant amount. However, you can greatly improve the performance by converting the scalar function to a table-valued function and using a
CROSS APPLY in the query. This is a wonderful trick that can yield great improvements.
Want to know more about the
APPLY operator? You'll find a full discussion in an excellent course on Microsoft Virtual Academy by Itzik Ben-Gan.
4. Do use partitioning to avoid large data moves
Not everyone will be able to take advantage of this tip, which relies on partitioning in SQL Server Enterprise, but for those of you who can, it’s a great trick. Most people don’t realize that all tables in SQL Server are partitioned. You can separate a table into multiple partitions if you like, but even simple tables are partitioned from the time they’re created; however, they’re created as single partitions. If you're running SQL Server Enterprise, you already have the advantages of partitioned tables at your disposal.
This means you can use partitioning features like
SWITCH to archive large amounts of data from a warehousing load. Let’s look at a real example from a client I had last year. The client had the requirement to copy the data from the current day’s table into an archive table; in case the load failed, the company could quickly recover with the current day’s table. For various reasons, it couldn’t rename the tables back and forth every time, so the company inserted the data into an archive table every day before the load, then deleted the current day’s data from the live table.
This process worked fine in the beginning, but a year later, it was taking 1.5 hours to copy each table -- and several tables had to be copied every day. The problem was only going to get worse. The solution was to scrap the
DELETE process and use the
SWITCH command. The
SWITCH command allowed the company to avoid all of the writes because it assigned the pages to the archive table. It’s only a metadata change. The
SWITCH took on average between two and three seconds to run. If the current load ever fails, you
SWITCH the data back into the original table.
This is a case where understanding that all tables are partitions slashed hours from a data load.
5. If you must use ORMs, use stored procedures
This is one of my regular diatribes. In short, don’t use ORMs (object-relational mappers). ORMs produce some of the worst code on the planet, and they’re responsible for almost every performance issue I get involved in. ORM code generators can’t possibly write SQL as well as a person who knows what they're doing. However, if you use an ORM, write your own stored procedures and have the ORM call the stored procedure instead of writing its own queries. Look, I know all the arguments, and I know that developers and managers love ORMs because they speed you to market. But the cost is incredibly high when you see what the queries do to your database.
Stored procedures have a number of advantages. For starters, you’re pushing much less data across the network. If you have a long query, then it could take three or four round trips across the network to get the entire query to the database server. That's not including the time it takes the server to put the query back together and run it, or considering that the query may run several -- or several hundred -- times a second.
Using a stored procedure will greatly reduce that traffic because the stored procedure call will always be much shorter. Also, stored procedures are easier to trace in Profiler or any other tool. A stored procedure is an actual object in your database. That means it's much easier to get performance statistics on a stored procedure than on an ad-hoc query and, in turn, find performance issues and draw out anomalies.
In addition, stored procedures parameterize more consistently. This means you’re more likely to reuse your execution plans and even deal with caching issues, which can be difficult to pin down with ad-hoc queries. Stored procedures also make it much easier to deal with edge cases and even add auditing or change-locking behavior. A stored procedure can handle many tasks that trouble ad-hoc queries. My wife unraveled a two-page query from Entity Framework a couple of years ago. It took 25 minutes to run. When she boiled it down to its essence, she rewrote that huge query as
SELECT COUNT(*) from T1. No kidding.
OK, I kept it as short as I could. Those are the high-level points. I know many .Net coders think that business logic doesn’t belong in the database, but what can I say other than you’re outright wrong. By putting the business logic on the front end of the application, you have to bring all of the data across the wire merely to compare it. That’s not good performance. I had a client earlier this year that kept all of the logic out of the database and did everything on the front end. The company was shipping hundreds of thousands of rows of data to the front end, so it could apply the business logic and present the data it needed. It took 40 minutes to do that. I put a stored procedure on the back end and had it call from the front end; the page loaded in three seconds.
Of course, the truth is that sometimes the logic belongs on the front end and sometimes it belongs in the database. But ORMs always get me ranting.
6. Don’t do large ops on many tables in the same batch
This one seems obvious, but apparently it's not. I’ll use another live example because it will drive home the point much better. I had a system that suffered tons of blocking. Dozens of operations were at a standstill. As it turned out, a delete routine that ran several times a day was deleting data out of 14 tables in an explicit transaction. Handling all 14 tables in one transaction meant that the locks were held on every single table until all of the deletes were finished. The solution was to break up each table's deletes into separate transactions so that each delete transaction held locks on only one table. This freed up the other tables and reduced the blocking and allowed other operations to continue working. You always want to split up large transactions like this into separate smaller ones to prevent blocking.
7. Don't use triggers
This one is largely the same as the previous one, but it bears mentioning. Don’t use triggers unless it’s unavoidable -- and it’s almost always avoidable.
The problem with triggers: Whatever it is you want them to do will be done in the same transaction as the original operation. If you write a trigger to insert data into another table when you update a row in the Orders table, the lock will be held on both tables until the trigger is done. If you need to insert data into another table after the update, then put the update and the insert into a stored procedure and do them in separate transactions. If you need to roll back, you can do so easily without having to hold locks on both tables. As always, keep transactions as short as possible and don’t hold locks on more than one resource at a time if you can help it.
8. Don’t cluster on GUID
After all these years, I can't believe we’re still fighting this issue. But I still run into clustered GUIDs at least twice a year.
A GUID (globally unique identifier) is a 16-byte randomly generated number. Ordering your table’s data on this column will cause your table to fragment much faster than using a steadily increasing value like DATE or IDENTITY. I did a benchmark a few years ago where I inserted a bunch of data into one table with a clustered GUID and into another table with an IDENTITY column. The GUID table fragmented so severely that the performance degraded by several thousand percent in a mere 15 minutes. The IDENTITY table lost only a few percent off performance after five hours. This applies to more than GUIDs -- it goes toward any volatile column.
9. Don’t count all rows if you only need to see if data exists
It's a common situation. You need to see if data exists in a table or for a customer, and based on the results of that check, you’re going to perform some action. I can't tell you how often I've seen someone do a
SELECT COUNT(*) FROM dbo.T1 to check for the existence of that data:
SET @CT = (SELECT COUNT(*) FROM dbo.T1);
If @CT > 0
It’s completely unnecessary. If you want to check for existence, then do this:
If EXISTS (SELECT 1 FROM dbo.T1)
Don’t count everything in the table. Just get back the first row you find. SQL Server is smart enough to use
EXISTS properly, and the second block of code returns superfast. The larger the table, the bigger difference this will make. Do the smart thing now before your data gets too big. It’s never too early to tune your database.